Pico Systems

Parallel Port Motion Control Motherboard

The motherboard connects the various boards of the PPMC system together, distributes power, and makes the connections to the traditional 25-pin "D" connector. An IEEE-1284 rated cable with 25-pin Male D connector on one end and 25-pin Female D connector on the other should be used to connect to the computer's parallel port.

The motherboard accomodates up to 8 PPMC boards. If more are needed, an expansion motherboard can be connected with a short ribbon cable.

The power cable is connected through a 6-contact Phoenix Contact plug-in wire header. There is a separate ground terminal for each voltage. Power inputs are +5 V, and + and - 12 V.

Connector Pinouts for the MotherBoard

Price List

For more information, contact :
Jon Elson
Pico Systems
543 Lindeman Rd.
Kirkwood,  MO  63122
(314) 965-5523
or, email at : elson@pico-systems.com


To Home